临朐铁力士破碎设备有限公司

山东临朐铁力士破碎设备有限公司供应铁力士4PG1012系列对辊破碎机(2PG系列对辊破碎机-山东破碎机--山东铁力士智能破碎设备有限公司)

具体价格请来电来函咨询!

山东临朐铁力士破碎设备有限公司主要产品有齿辊、堆焊辊、高锰钢平辊2GP系列破碎机和4GP系列破碎机,2PG系列双齿辊破碎机、4PG系列四齿辊破碎机、2PG系列对辊破碎机、4PG系列四辊破碎机、2PGY系列辊压机,产品型号有2GPO605、2GP0806、2GP0809、2GP1008、2GP1212、2GP1216及4GP0605、4GP0809、4GP1012、4GP1212等,也可根据客户需求,为你量身定做。人工制沙生产线,细碎生产线以及给料机、布料器、除铁器、振动筛。

4PG系列四齿辊破碎机

概述

四齿辊破碎机适用于抗压力强度小于200Mpa,湿度小于30%的中硬度及软物料,而且要求粒度粉末状少、颗粒状多的细碎及中碎作业。如煤、焦炭、化肥原料、石油焦、玻璃管、化工原料等固体物产,本机器具使用维修费特低、破碎比大、性能可靠、粉尘少、噪音低等特点。

四齿辊破碎机配置四个碾辊,上两昆为齿辊面,下两辊为堆焊辊面(或平辊面),适用于进料粒度小于700mm,成品粒度要求2-20mm的中细碎作业。如热电厂硫化床锅粮、普通锅炉用煤的破碎;化肥厂破碎化肥原料;太阳能行业破碎废玻璃管等;或者与上述类似的破碎场合。

Summarize

Four-teeth roll crusher suitable for compression strength lessthan 200Mpa, humidity less than 30% of the medum hard and softmaterials. In addition, it is for fine and intermediate crushingwhich has few powder and lots of grains. Such as coal, coke,fertilizer, raw material, petroleum coke, glass, chemicals andother solid materials. Features: low use and maintenance coste,high ratio of reduction, high reliabiblty, low dust, low noise.

Four-teeth roll crusher is fixed with four abrasive rolls,thetop two are discaling rolls, the next two are flat. Maximum feeding700mm, range of the dixcharge 2-20mm. Operations in theintermediate and fine crushing. Such as thermal power plant’sfluidized bed boiler;The breaking of ordinary steam coal;fertilizer raw material crushing of fertilizer plant; solarindustry crushes waste glass tube;or in the similar occasion.

4PG Series Four-teeth roll crusher

工作原理

四齿辊破碎机是利用四个高强度耐磨碾辊,相对旋转产生的高挤压力和剪切力来破碎物料。物料进入上两齿辊间隙(V型破碎腔)以后,受到两齿辊相对旋转的挤压和剪切作用,首次将物料挤轧、剪切后(粗破),再次进入相对旋转的下两辊,再由下两辊挤轧、剪切、和啮磨(细破)成需要的粒度从排料口排出。

Working principle

Four-teeth roll crusher is fixed with four high-strengthwear-resistant grinding rolls. Their relative rotation generateshigh extrusion pressuer and shear force. The material enters intothe space between the two rolls. The first time, it is extruded,rolled and sheared(thick broken). Then it comes to the next tworotating rolls. Here it is extrueded, cut and grounded to

the required size, sent by the transport equipment.

主要技术参数/Specifications

region-ail-credit